Tel :+86-510-85225618
You are here: Home » Products » LPG Gas Cylinder Machineries » Powder Coating Line » Auto Parts Wheels Electrophoresis Powder Coating Line

Products

loading

Share to:
sharethis sharing button

Auto Parts Wheels Electrophoresis Powder Coating Line

Quantity:
  • HLT12-50

  • SGS

  • HLT

  • China Jiangsu

  • 8424899990

  • 1000

  • Available | Customized Request

Product Description

Auto Parts Wheels Electrophoresis Powder Coating Line
The production line consists of pre-treatment, electrophoresis, curing drying tunnel, catenary system, electronic control system and so on.

1.Pre-treatment and Post-treatment
Pre-treatment is suitable for silane environmental protection process.
Post-treatment adopts a full spray process, which can effectively form a film. The shed body and the liquid storage tank are all made of stainless steel; the spray side plate is double-layered. Ensure that there is no leakage, insulation cotton is added between the two layers of the heating section, and the outer panel is plug-in type. This structure provides aesthetics, noise reduction, and saves functionality.
Auto Parts Wheels Electrophoresis Powder Coating Line
Auto Parts Wheels Electrophoresis Powder Coating Line

2.Electrophoresis

Electrophoresis is equipped with electrophoresis aids: rectified power and conductive devices, ultrafiltration systems, anode systems, main circulation systems, and transfer tank systems.
Auto Parts Wheels Electrophoresis Powder Coating Line

3.Delivery method
The catenary uses QXT200/30KG. Double drive double tensioning, controlled by frequency converter. Equipped with C-type hangers and oil-splitting plates to reduce contamination of the workpiece and suitable for product process production.
Auto Parts Wheels Electrophoresis Powder Coating Line
4.Drying road
The drying tunnel is arranged on the whole platform, the fire passage and the electrophoresis auxiliary device are arranged below, and the side panel adopts the male and female plug-in structure. It uses a full bridge to save energy. The drying tunnel is provided with an exhaust pipe and a wind curtain. The top is provided with a venting opening. The inner plate is made of δ0.8 galvanized steel plate, and the outer plate is made of δ0.8 color steel plate. The heating room is equipped with an access door and a cold air inlet for cooling.
Auto Parts Wheels Electrophoresis Powder Coating Line
5.Electronic control system
The electronic control system adopts centralized control and decentralized setting principles
Operated with PLC+ touch screen
Each relevant part is provided with an interlock
The liquid storage tank is provided with a liquid level gauge, and the low liquid level is interlocked with the water pump and alarmed.



Previous: 
Next: 

Related Products

CONTACT US

Copyright  2018 Wuxi Longterm Machinery Technologies Co.,Ltd. all rights reserved.

Address :No.2-18 Longshan Road, Wuxi National Hi-tech Industiral Development Zone, Jiangsu,China
Contact person: Ms. Kelly Huang
Tel :+86-510-85225618,85226980
Cellphone/Whatsapp :+86-15052276858, 13182761356
Email :kily_li3@126.comkelly.huang@longtermmachinery.com
Skype ID:Kellyhuang7110
Wechat:+86 15052276858  
QQ: 188081344
Home